Splice Type MET 200
Seam in sheet composed of cellulose fibers, mineral fillers, elastomeric binder based on NBR, suitable for low temperatures and pressures.
Fuels, vegetable and animal oils, lubricants, gases, hot and cold water.
Max. work range temperature
Max. work range pressure
Stress retention 16 hours – 175°C. 50 N/mm2
Tensile strenght (min.)
Permeability to nitrogen
Loss on ignition
Diving behavior ASTM F146 – in oil ASTM n°3 for 5 hours at 150°C
Behavior after immersion in oil ASTM F146 15% ASTM n°3,5, 150°C. Thickness increase
Behavior after immersion in fuel ASTM F146 10% ASTM B 5 hours, 20°C. Thickness increase
Constant clamping ASME – VSR
Thickness > 1,5 mm.
*The data listed depend on a variety of factors (state of the joints, dimensions, clamping, thermal and mechanical shock etc.) To which can be indicated for orientation purpose.